Here's mine
1) LBT/Mos
2) Accurate
3) Noe
4) RCBS
5) A Distant Everything Else
I haven't used every mold company"s product but this list more than covers my needs.
Here's mine
1) LBT/Mos
2) Accurate
3) Noe
4) RCBS
5) A Distant Everything Else
I haven't used every mold company"s product but this list more than covers my needs.
Attached Files
I’m just a shooter, plinker. I don’t shoot matches, I’m in it for the casting, reloading enjoyment. But I like to make a tight group.
NEI Walt cut molds NOE Arsenal Accurate RCBS LEE and I’ll add 6 cavity molds which for the money should probably rank higher on the list. Lot of bang for the buck.
Attached Files
Accurate Older Lyman Older Lee
If someone else had of done to me what I did to myself . . . I'd have killed him. Humility is an asset. Heh - heh.
Attached Files
Accurate is my favorite custom maker. If I can find a Lyman or Ideal that I like, stamped "U" (for undersize), I'll buy it.
Attached Files
Lyman / Ideal
Modern Bond
Hensley & Gibbs
Noe
NEI
LBT - but I don't own one myself.
Prefer old Lyman or Modern Bond handles to any others. Was in the process of making an order from LBT when they had the fire so I will most likely never own the mold of Veral's that I wanted, it's an odd ball . Got some Winchester molds that I like a lot.
Grumpy Old Man With A Gun......Do Not Touch .
Attached Files
I don’t cast my own but I like the ones I buy that are cast in Hensley & Gibbs molds they are my favorites.
Fred Honeyager
Attached Files
I go with any steel mold out there except the recent versions by Lyman, they can’t seem to be able to get their alignment pins properly placed. No aluminum or brass molds for me!
Forrest Gump is my smarter brother.
Attached Files
I only cast for 357 and 30 cal but it's lee for me, 6 cav for my 94 30/30 FP another 2 cav for my 308 BLR and the 158 grn swc TL very old lee mold for the 357 in my rossi carbine.
Attached Files
I'm quite new to casting, dropped my first boolits just a couple years ago. Of the molds I've acquired to date I'd have to say RCBS, MP, NOE, and Lyman in that order. Shuz let me borry a couple SAECOs and they were nice. Cast my first boolits Apr '21 and down the rabbit hole I went.
Attached Files
I'll play . #1- LBT. #2- SAECO. #3- H&G. #4- RCBS (older). #5- Ideal SC, (my sentimental favorite). #6- Accurate, I don't have enough experience with Toms moulds, but the ones I've had were stellar.
As I enter my sell down, starting next month.
Attached Files
My Hoch 50 caliber 450 grain mould is like that, not the 30 not so much.
Attached Files
Hoch single cavity pre Colorado. It takes 2 or 3 casts and it's up to temp, and I can't cast fast enough to get a frosted bullet. Weigh sorting these are a waste of time. And it's a nose pour.
Attached Files
I have a lot of molds from just about everyone. Hard to pick a favorite, no really bad ones. I’m fond of my Ranch Dog 6 cavity’s. Simple and well thought out. I even had him autograph a mold box for me! I know, Lee made his molds. Never had any complaints about Lee’s 6 cavity molds. Lotta bang for the buck.
good to hear you are kicking. Here you are in Puyallup at the Military Nationals in 2010.
At least I think it's you?
"if it was easy we'd let women do it" don't tell my wife I said that!
Attached Files
I have a lot of molds from just about everyone. Hard to pick a favorite, no really bad ones. I’m fond of my Ranch Dog 6 cavity’s. Simple and well thought out. I even had him autograph a mold box for me! I know, Lee made his molds. Never had any complaints about Lee’s 6 cavity molds. Lotta bang for the buck.
Attached Files
For me, and I'm dating myself here, the best pistol bullet molds of all time came from Hensley & Gibbs. Their classic H&G #68 200 grain Semi-Wadcutter mold in 45 cal was my favorite for 45ACP. I still have that mold.
Attached Files
I hate H&G molds!
But seriously, I sold all of these off and did like Mr. Harris and replacd them with accurate Aluminum moulds that fit my particular guns. Much easier to handle than these big pigs.
"if it was easy we'd let women do it" don't tell my wife I said that!
Attached Files
Was starting to wonder when H&G would be mentioned.
I’d have to say: Accurate Hensley & Gibbs (#244 wadcutter) MP. I have a 6-cavity HG68 clone & an 8-cavity SAECO 348 clone (.38 DEWC) that positively rain beautiful bullets practically from the first cast when properly pre-heated. Just wish the .38s dropped a little smaller (they’re .360.)
In another life I owned some LBTs which were awesome. Sad to see Veral leaving the business.
Attached Files
Here's mine 1) LBT/Mos 2) Accurate 3) Noe 4) RCBS 5) A Distant Everything Else I haven't used every mold company"s product but this list more than covers my needs.
I would add Eagan somewhere between one and two.
But I have to agree every LBT mold I have ever used has been perfect ,that sprue design is phenomenal.
"if it was easy we'd let women do it" don't tell my wife I said that!
Attached Files