Reduced Rifle Reloads w Hodgdon Universal

  • 270 Views
  • Last Post 16 January 2021
  • Topic Is Solved
Elmer posted this 16 January 2021

Howdy,

I would like to make some reduced velocity handloads for 7mm-08 using 120-140gr jacked bullets and Hodgdon Universal. I've some 160 lead gc as well.

Can anyone, Ed Harris, Seafire, et al help me out?

Best wishes,

Jack from PA

JSM

Attached Files

Order By: Standard | Newest | Votes
Eutectic posted this 16 January 2021

Jack,

I would start at 10 grains which should give you about 1300 -1400 fs. with both the jacketed and cast. I would not go over 14 grains. You want a light load so the 10 grain load should work.

Steve

 

Attached Files

  • Liked by
  • RicinYakima
Bud Hyett posted this 16 January 2021

 Sent you a message with a table from QuickLoad to give you a beginning. 

Farm boy from Illinois, living in the magical Pacific Northwest

Attached Files

  • Liked by
  • Elmer
Elmer posted this 16 January 2021

Dear Steve &Bud,

Thank you both. I'll try it after I dig my reloading equipment out if my mess.

I'm looking for additional presses to augment a Lee O press and SDB in .44 mag. I'm on a wait list for a Lyman and/or Lee C press and the Lyman Brass 8-stage turret. That should do it.

Do you fellows have any experience with arbor presses, me not being a machinist? My gig is with living stuff.

You are welcome to visit if you get to central PA. Like Louis L'Amour says, the coffee is always on. I love classical literature, don't you?

Jack Majcher Altoona PA

JSM

Attached Files

Close