Howdy,
I would like to make some reduced velocity handloads for 7mm-08 using 120-140gr jacked bullets and Hodgdon Universal. I've some 160 lead gc as well.
Can anyone, Ed Harris, Seafire, et al help me out?
Best wishes,
Jack from PA
JSM
Howdy,
I would like to make some reduced velocity handloads for 7mm-08 using 120-140gr jacked bullets and Hodgdon Universal. I've some 160 lead gc as well.
Can anyone, Ed Harris, Seafire, et al help me out?
Best wishes,
Jack from PA
JSM
Attached Files
Dear Steve &Bud,
Thank you both. I'll try it after I dig my reloading equipment out if my mess.
I'm looking for additional presses to augment a Lee O press and SDB in .44 mag. I'm on a wait list for a Lyman and/or Lee C press and the Lyman Brass 8-stage turret. That should do it.
Do you fellows have any experience with arbor presses, me not being a machinist? My gig is with living stuff.
You are welcome to visit if you get to central PA. Like Louis L'Amour says, the coffee is always on. I love classical literature, don't you?
Jack Majcher Altoona PA
JSM
Attached Files
Sent you a message with a table from QuickLoad to give you a beginning.
Farm boy from Illinois, living in the magical Pacific Northwest
Attached Files
Jack,
I would start at 10 grains which should give you about 1300 -1400 fs. with both the jacketed and cast. I would not go over 14 grains. You want a light load so the 10 grain load should work.
Steve
Attached Files