Lead-Tin alloy ratios

  • 1.9K Views
  • Last Post 23 February 2016
.22-10-45 posted this 21 February 2016

Hello, I have 10# of 40-1 pure lead/tin alloy which is 2.5% tin  97.5 lead.  If I wanted to change this to a harder 30-1 lead-tin alloy, would adding .5% ...350grs. tin be close enough?  Thanks!

Attached Files

Order By: Standard | Newest | Votes
RicinYakima posted this 21 February 2016

Close enough, unless you want to try 362.5 grains. Your math is OK.

Attached Files

.22-10-45 posted this 22 February 2016

I forgot to mention the only form of tin I have is 50-50 solder bars & wire. If I add tin in this form..1/2 will be pure lead which I already have too much of..can you help my math challenged brain to figure this out? Thanks!

Attached Files

Paul Pollard posted this 23 February 2016

If you really, really want to use the 50/50 solder, you will need to get 10 lbs of pure lead. Then add 11 ounces of 50/50 solder to the 10 lbs lead. Should be close. 96.78% lead and 3.22% tin. Close to 30:1 lead/tin.

Attached Files

mike0841 posted this 23 February 2016

Below is an Excel spread sheet you can download and use for alloy composition.  The sheet works excellent and I use it all the time.  Just click on the link and the sheet will download to your computer.  It is also available on the web site under Downloads/Alloy Calculator.  Hope this helps with your alloying.

http://castbulletassoc.org/downloads/Alloy12.xls>Alloy Calculator

Mike CBA Webmaster

Attached Files

.22-10-45 posted this 23 February 2016

Thanks..I did use alloy calculator..came up with .18lb. (2.88 OZ.) of 50-50 solder to 10# 40-1 for a final alloy of 3.28% tin & 96.7% lead. Pretty close. I have used lead-tin alloys for a long time..just never had to go the other way. Thanks alot!

Attached Files

Close