Larger than standard Lyman lube sizer dies

438 Views
Last Post 1 weeks ago
Topic Is Solved

CBA Member

Slug Gun posted this 4 weeks ago

Does anyone offer or grind Lyman lubesizer style or Star sizer dies larger then the standard sizes available ?

Attached Files

9 Comments

Order By: Standard | Newest | Votes

Standard Member

OU812 posted this 4 weeks ago

You can open them up larger using sandpaper. Wrap masking tape around dowel, next wrap 400 grit paper to fit. Spin in drill until desired size needed. Size bullets during sanding to check actual size after sizing.

Attached Files

CBA Member

Aaron posted this 4 weeks ago

Lee Precision can make one

https://leeprecision.com/custom-classic-bullet-sizing-kit

With rifle in hand, I confidently go forth into the darkness.

Attached Files

CBA Board

Glenn R. Latham posted this 4 weeks ago

A fellow on Cast Boolets, goes by ammohead, makes custom H&I does.

Attached Files

CBA Member

hporter posted this 4 weeks ago

Ammohead made me a couple of large bore Star dies last year. One for my .54 Sharps and one for my 56-50 Spencer. Turned out great. I have a .577 die for my Star as well, so you can go pretty big if they are cast soft.

Attached Files

Standard Member

Pigslayer posted this 4 weeks ago

You might try Buffalo Arms. They carry a real good selection for both Lyman and RCBS lubersizers.

If someone else had of done to me what I did to myself . . . I'd have killed him. Humility is an asset. Heh - heh.

Attached Files

CBA Member

Aaron posted this 4 weeks ago

Buffalo Arms will also make a custom die. They made me a .459 die.

With rifle in hand, I confidently go forth into the darkness.

Attached Files

Standard Member

Pigslayer posted this 3 weeks ago

They made a .433 die for me. I like dealing with them. I buy all of my brass from them too.

If someone else had of done to me what I did to myself . . . I'd have killed him. Humility is an asset. Heh - heh.

Attached Files

Liked by

Standard Member

[email protected] posted this 1 weeks ago

Yes, SEF SPORTS, 109 woodland Ave. Green Bay, WI 54303-2847, phone 920-497-8790. They can furnish the die brand of choice and hone it out to your reqired dimensions. I have used them multiple times. Im happy.