WTB 9.3 (.368 dia) mold

  • 165 Views
  • Last Post 3 weeks ago
TRKakaCatWhisperer posted this 3 weeks ago

WTB 9.3 (.368 dia.) mold

Prefer plain based.

Attached Files

Order By: Standard | Newest | Votes
45 2.1 posted this 3 weeks ago

Lyman 366408's are difficult to find. I've seen three over a lifetime. The first had the driving bands bored out to make a smooth-sided 38-55 paper patch mold. The others were unaltered single cavities. They shoot very well in the 9.3x57. Good luck in finding one.

Attached Files

  • Liked by
  • TRKakaCatWhisperer
rjmeyer314p posted this 3 weeks ago

Yes,366408 molds are hard to find. I programmed a search on EBay and it took a couple years for one to come up. The good news is that nobody bid against me.

Attached Files

  • Liked by
  • TRKakaCatWhisperer
Mouldknocker posted this 3 weeks ago

Go to Accurate molds and get one, unless your just looking for Lyman iron.

Attached Files

Spindrift posted this 3 weeks ago

Arsenal molds have a 9,3 bore rider. You can specify the size, number of cavities, PB/GC or combinations thereof. If this design suits your needs, it is a pretty affordable option.

I have only good things to say about their moulds. They fit Lee handles.

Attached Files

JeffinNZ posted this 3 weeks ago

Try NOE.

.368 -9.3mm | NOE Bullet Moulds (noebulletmolds.com)

 

Cheers from New Zealand

Attached Files

  • Liked by
  • TRKakaCatWhisperer
JeffinNZ posted this 3 weeks ago

And....

366 (9.3mm) cal (castbulletengineering.com.au)

Cheers from New Zealand

Attached Files

  • Liked by
  • TRKakaCatWhisperer
Close