WTB 9.3 (.368 dia) mold

  • 208 Views
  • Last Post 04 October 2021
TRKakaCatWhisperer posted this 29 September 2021

WTB 9.3 (.368 dia.) mold

Prefer plain based.

Attached Files

Order By: Standard | Newest | Votes
45 2.1 posted this 30 September 2021

Lyman 366408's are difficult to find. I've seen three over a lifetime. The first had the driving bands bored out to make a smooth-sided 38-55 paper patch mold. The others were unaltered single cavities. They shoot very well in the 9.3x57. Good luck in finding one.

Attached Files

  • Liked by
  • TRKakaCatWhisperer
rjmeyer314p posted this 30 September 2021

Yes,366408 molds are hard to find. I programmed a search on EBay and it took a couple years for one to come up. The good news is that nobody bid against me.

Attached Files

  • Liked by
  • TRKakaCatWhisperer
Mouldknocker posted this 01 October 2021

Go to Accurate molds and get one, unless your just looking for Lyman iron.

Attached Files

Spindrift posted this 03 October 2021

Arsenal molds have a 9,3 bore rider. You can specify the size, number of cavities, PB/GC or combinations thereof. If this design suits your needs, it is a pretty affordable option.

I have only good things to say about their moulds. They fit Lee handles.

Attached Files

JeffinNZ posted this 03 October 2021

Try NOE.

.368 -9.3mm | NOE Bullet Moulds (noebulletmolds.com)

 

Cheers from New Zealand

Attached Files

  • Liked by
  • TRKakaCatWhisperer
JeffinNZ posted this 04 October 2021

And....

366 (9.3mm) cal (castbulletengineering.com.au)

Cheers from New Zealand

Attached Files

  • Liked by
  • TRKakaCatWhisperer
Close