Interesting reading and photos. Some are scary how bad they are.
http://www.lasc.us/BellmChamberCasts.htm
Cheers from New Zealand
Bellm on factory TC chambers
- 518 Views
- Last Post 10 February 2017
SierraHunter
posted this
10 February 2017
Interesting read. When I built my first rifle I chambered it with no throat at all thinking it would be a good thing. Maybe I need to get a throat reamer. I never did have great accuracy...
Attached Files
Ken Campbell Iowa
posted this
10 February 2017
no throat ....there was a similar system used by adolph neidner ... with some success ... but he used a bullet about 90 per cent bore rider, and 10 per cent groove band at the base ....
...and dr. mann used basically bore riders in his tests ..... not sure that is much of a recommendation, just an observation ....
my opinion is that bore riders are a good way to get 2 moa, and so are very popular because that is all most of ( us ) people need ..... below 2 moa the best system is apparently still subject to debate and experimentation .
ken
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
-
Glenn R. Latham
2
-
OU812
2
-
linoww
1
