Twist rates

  • 448 Views
  • Last Post 02 January 2025
JeffinNZ posted this 02 January 2025

My club has a library with rather a lot of older publications.  Lately I have been reading some of them and the most recent, 'Practical Dope on the .22' by Ness, I noted a few interesting (I think) things.

1) Accuracy has come a long way.  Published in 1947, Ness refers to a lot of load testing of factory and handloads where accuracy is 1.5-2.0 MOA and seems happy with that.  

2) Things being touted as 'new' these days like very snug neck tolerances were well recognised at the time.

3) Rates of rifling twist were slower.  Ness refers to Lovell considering a 1-20 twist for a 55gr jacketed bullet with "excellent accuracy and stability" (page 271 paragraph 1).  

Still very relevant and interesting reading.

Cheers from New Zealand

Attached Files

Order By: Standard | Newest | Votes
RicinYakima posted this 02 January 2025

I bought all of the Wolfe Publishing reprint books from the 1920's -1950's. They are an excellent resource. 

Attached Files

.22-10-45 posted this 02 January 2025

I too enjoy reading vintage gun books. Those shooting pioneers new their stuff. From reading, I believe the reason for using a slower than normal twist rate was to be able to achieve greater velocity with lower pressure. They didn't have the slower burning powders of today. They figured faster velocity would make up for the slower twist.

Attached Files

Close