NOE IS BACK

  • 429 Views
  • Last Post 01 February 2026
trapdoor4570 posted this 31 January 2026

Great news. NOE is back in production! Just received an email this morning with the announcement. Al is asking for input, for a list of which molds to start on first. Check your emails for the news.

Attached Files

  • Liked by
  • delmarskid
  • Aaron
Order By: Standard | Newest | Votes
JimmyDee posted this 31 January 2026

I got it, too.  Good for us!

Attached Files

Wm Cook posted this 31 January 2026

Another positive step. 

I saw where they are taking suggestions as to what they should be cutting first.  I know I'm in the minority here but maybe they would cut a few of the 22cal 79 SP B5's if anyone else showed some interest.  They've been out of stock for 2, maybe three years. 

It's great to hear about the comeback.   I wish them success and I hope Al still finds time to goof off in his quasi retirement.  Bill C.

Attached Files

pat i posted this 31 January 2026

Always wanted to try this one

310-165-FN-H3 2 Cavity PB

Attached Files

Aaron posted this 01 February 2026

Well I can't find any link to ask for molds to prioritize so I hope an email works. We shall see.

 

With rifle in hand, I confidently go forth into the darkness.

Attached Files

Aaron posted this 01 February 2026

I want to try the 460-396-HP PB in the 45-70 Win.

With rifle in hand, I confidently go forth into the darkness.

Attached Files

Aaron posted this 01 February 2026

Perhaps it's just me but I find the NOE web site extremely difficult to navigate. The "forum" is hopeless for me. Oh well. If it's in stock it's easy to add to the cart but if it's out of stock, forget it. I have never had a response to an email either. Perhaps that will improve?

I'm on their email list but I never got an email that they were back in production. Hmmm.

 

With rifle in hand, I confidently go forth into the darkness.

Attached Files

MP1886 posted this 01 February 2026

Aaron his website isn't the easiert to navigate. I'm glad to see him back in business and I put a request for a particularly hard to find Lyman mould for a 7x57 Mauser, or other 7mmers as he is or was most excellent at copying and duplicating Lyman moulds. In case you are wondering it's the Lyman 287308 mould of about 160 some grains and is part borerider and part bearing bands. It's hens teeth to find. If anyone has that mould I would greatly appreciate a few bullets from it to see if I can get a mould maker to make a mould for it. Accurate in out because of his honking too big meplats.  That really destroys the BC of a bullet. 

Attached Files

  • Liked by
  • Aaron
pat i posted this 01 February 2026

Well I can't find any link to ask for molds to prioritize so I hope an email works. We shall see.

 

Same here. No link that I can find.

Attached Files

  • Liked by
  • Aaron
MP1886 posted this 01 February 2026

Well I can't find any link to ask for molds to prioritize so I hope an email works. We shall see.

 

Same here. No link that I can find.
Try this:    noebulletmolds.com/site/forums/topic/we-are-back-in-production/?mc_cid=476b58ec01&mc_eid=fbc49ee5c3

Attached Files

  • Liked by
  • Aaron
Aaron posted this 01 February 2026

Thanks for the link. Unfortunately even though I am logged into the web page at NOE, this has always been what I see on the "forum"

I hope they get a lot of this admin mess corrected and cleaned up. If Accurate Molds made HP molds......

 

With rifle in hand, I confidently go forth into the darkness.

Attached Files

MP1886 posted this 01 February 2026

Okay Aaron, this is what I found going to the main webpage and clicking on Forum:

We are currently working on moving the forums into the main site so users will no longer need two logins.    The old forum page is linked at bottom as archived forums.   We will continue to work to add messaging and other components to the new forum in the coming days and weeks.

Attached Files

  • Liked by
  • steveu
Wm Cook posted this 01 February 2026

NOE was in a holding pattern for the past couple years and the web site, although usable, was not as smooth as they would have liked. I say we give them 6 months to get the cobwebs brushed off and until them, support them as the come back on line. I think they filled a critical need for cast shooters.

Relocating an entire manufacturing business and designing a user friendly web site is both time consuming & expensive. I’m glad they’re coming back. Bill C.

Attached Files

  • Liked by
  • Aaron
Aaron posted this 01 February 2026

Agree. I hope they read their emails.

 

With rifle in hand, I confidently go forth into the darkness.

Attached Files

Categories
Search
Popular Tags
This Weeks High Earners
Hot Topics
Close