Does anyone have and use one of these things with cast bullets? A couple of months ago I ran an unplanned test to see if my ProChrony was bullet proof.....it wasn't. Need a replacement and thought something like this would survive a little longer. Anyone have experience with it? I read it doesn't work very well with lead bullets but I've read a lot of things that weren't exactly true which is why I'm asking opinions from a group I trust that actually has some time with it.
Magneto Speed Chronograph
- 321 Views
- Last Post 07 March 2024
I tried out my MagnetoSpeed chronograph today and it's a winner. Easy to set up and no lost shots. I like and recommend it.
Attached Files
Pat i: I believe that tight and flimsy case for the Magnetospeed is the reason why I've broken two over some years. I suggest you store it in a larger case of some sort, that doesn't strain the cable connection to the bayonet.
Attached Files
poker.No matter what the product is, in this case the Magetospeed chrono, I'll contact the company that makes such product rather then someone on a forum that has no affliation with them.
? I don't get that one
Attached Files
No matter what the product is, in this case the Magetospeed chrono, I'll contact the company that makes such product rather then someone on a forum that has no affliation with them.
Attached Files
I couldn't agree more that a chronograph is nothing but an expensive toy but with all the expensive toys I have to shoot cast bullets what's one more and in actuality its one of the cheaper ones. Plus it gives people the impression you really know what you're doing when you whip it out the range.......the chronograph that is.
Attached Files
MP,
I own (3) chrony's. After visiting this threard, I went out to the garage to find the box they are stored in and I am throwing the two early versions away.
Back when I messed with the Chrony's, the fastest loads were never the most accurate. Back in the early 80's our gun club had a chrongraph you could borrow, by leaving your drivers license with the manager. There was a member who insisted that he never hung up a target. He told me that he just shot varying loads over the two screens until the best stats were seen. That then was the load that accuracy was examined for. I actually tried the same stunt....absolute failure! Not sure if he ever did what he said he did.
I do know that my black powder loads ina Model 74 Sharps produce the best accuracy when the Sd is low, less than 10. But it's been quite a few years since I looked @ chrono stats.
Tom
Attached Files
Chronographs are an affectation in my thought. Using a chronograph years ago when I was in Illinois, I found the accurate loads often have a lower extreme spread. However, not all loads with a lower extreme spread are more accurate.
Decided that the money that would have been spent on a chronograph would be better spent on powder, lead and primers for practice. And the decisions from testing of a specific load should be from three ten-shot groups or five five-shot groups, not relying on the attribute of extreme spread..
Farm boy from Illinois, living in the magical Pacific Northwest
Attached Files
Interesting topic. I own (3) Chrony's. Each a different generation. I like the newer one with the bench mounted readout the best. The last time I used one was maybe 8-years ago or so. Since then I just guess @ the muzzle velocity. I guess I've devolved into just believing what the targets tell me. Knowing how fast the bullet is moving is interesting but not critical information. Just how many components are you willing to consume to develop the "perfect" velocity, and when you do, then what?
The Garmin @$599 is just way too expensive for me. I'm retired and should be down sizing and not continuing to buy things that do not have a somewhat high level of frequent and valueable use. My kids and grandkids will appreciate that.
Tom
Tom think about this and no I'm definitely not trying to talk you into buying a chrony, the radar ones are fat too expensive. Anyways say you're trying to perfect a load and you're fiddling with the amount of powder and also different powders, a chrono can help you by telling you the ES and SD of load you're shooting. When that ES gets down to single digits you know you got a very good consistant load. I find myself using my chrono less and less. Too much stuff to haul to the bench too.
Attached Files
Interesting topic. I own (3) Chrony's. Each a different generation. I like the newer one with the bench mounted readout the best. The last time I used one was maybe 8-years ago or so. Since then I just guess @ the muzzle velocity. I guess I've devolved into just believing what the targets tell me. Knowing how fast the bullet is moving is interesting but not critical information. Just how many components are you willing to consume to develop the "perfect" velocity, and when you do, then what?
The Garmin @$599 is just way too expensive for me. I'm retired and should be down sizing and not continuing to buy things that do not have a somewhat high level of frequent and valueable use. My kids and grandkids will appreciate that.
Tom
Attached Files
The important part to the use of the Magneto Speed I've found is to set the "sensitivity" setting correctly.. When you get one, any questions with its use I'll be glad to help best I can.
LMG
Thanks Larry. I just picked one up and might take you up on that offer down the road if I run into a snag. I set the sensitivity to "2". Ill start there and see what happens. It is a little thing. I expected it to be bigger. I'll also have to find something to store it in. That little case they give you is mighty tight and flimsy.
Thanks for the heads up on the cable Spindrift. I'll keep an eye on it.
Attached Files
I've gone through two magnetospeeds. They work well with all kinds of bullets, under all kinds of circumstances. The cable attachment to the bayonet seems to be a little vulnerable, treat it respectfullly.... I bought a Labradar just before Garmin released their radar. Still struggling a little with the Labradar...
It's too bad you didn't wait a little bit longer. First Garmin came out with a radar chronograph and the reviews on it are great. It's also very small. Apparently Labradar heard about it and they just now came out with a small model very much like the Garmin. All of these are too rich for my blood for the amount of chronographing I do. Just for your and other's information.
Attached Files
I've gone through two magnetospeeds. They work well with all kinds of bullets, under all kinds of circumstances.
The cable attachment to the bayonet seems to be a little vulnerable, treat it respectfullly....
I bought a Labradar just before Garmin released their radar. Still struggling a little with the Labradar...
Attached Files
Labradars are going for as little as 300 bucks now that the Garmin is out.
Attached Files
The important part to the use of the Magneto Speed I've found is to set the "sensitivity" setting correctly.. When you get one, any questions with its use I'll be glad to help best I can.
LMG
Concealment is not cover.........
Attached Files
Thanks for reporting the thing actually works Larry.
Attached Files
600 bucks for the Garmin, 500 bucks for the Labradar, 250 for the Magneto. I have a 150 bucks in Cabela points so I think my choice is narrowed to 1. Magneto it is.
Ken if you were offering the Chrony for sale once again I appreciate your offer but I've come to the conclusion that any chronograph more than 1 foot in front of my muzzle has about a 50% chance of living out the day.
Attached Files
from what i have read the new killer garmin is putting a lot of perfectly good magneto speed and labradar on the used market ...
if you just want another chrony target i have one in my stash ... i think is new in box ... i am still waiting for a reason to use it ...\ken
Attached Files
Used my Magneto Speed just today. Was at the range setting up and a fellow shooter couldn't get his Chrony to read {bright low Sun] . He was shooting Christianson Arms 6.5 CM with jacketed. I offered the use of the Mageto Speed and he accepted. No problems attaching to barrel. Chronographed every shot with it. Neither the accuracy nor the poi was affected.
It is a spare and I got it by a fluke. Guy using it couldn't get it to work so, in frustration, he threw it into the garbage and left the range. I pulled it out of the garbage and called the manufacturer who said to ship it back. I did and two weeks later a new one arrived. I offered it to the original owner but he said he wanted nothing to do with it so that's how I got it. I leave it in my shooting box for a spare.
I haven't used it with cast yeet as I use my Oehlers all the time. Might have to give it a test.....
LMG
Concealment is not cover.........
Attached Files
They go down pretty easily, doesn't matter whether you're using cast or jacket. They don't go very far after hit.
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- Bryan Austin 20
- fc60 15
- Ed Harris 11
- Bud Hyett 9
- linoww 8
- DanLH 5
- Aaron 5
- RicinYakima 4
- Wilderness 3
- 9.3X62AL 3