M10 QUESTION

  • 184 Views
  • Last Post 27 January 2019
joeb33050 posted this 26 January 2019

WITH THE CYLINDER OPEN, THE TRIGGER/HAMMER DON'T OPERATE.

CLOSE THE CYLINDER AND EVERYTHING WORKS

WHAT LOCKS/UNLOCKS THE APPARATUS?

Thanks;

joe b.

Attached Files

Order By: Standard | Newest | Votes
RicinYakima posted this 26 January 2019

The button that you slide forward to release the cylinder also has a rear tail. When the cylinder is open, the tail slides under the hammer and locks the action. You can manually hold the button to the rear and the hammer will cock.

Attached Files

David Reiss posted this 27 January 2019

This a safety measure so that the revolver does not fire when the cylinder is not locked as Ric states. In the photo below, you can see the bolt (which is moved back and forth by the thumb piece) just below the hammer on the far left. As Ric says it will block the hammer pushed forward. The bolt pushes the cylinder center pin in when pushing on the thumbpiece to open the cylinder. On the right side of the hammer you can see the other end of the bolt with the small protrusion which pushes the center rod through the recoil plate. 

Disregard the double-action only action, it is the same as the traditional double action for this purpose. 



David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .

Attached Files

JeffinNZ posted this 27 January 2019

Revolvers really are a thing of mechanical beauty.

Cheers from New Zealand

Attached Files

Close