I just bought some Buffalo powder,a shooters world powder.It'ssuppose to be similar to 5744&4759,there is little data for it.I have not tried it yet but will do so soon.Shooters world states it is good for reduced loads and cast bullets.I believe I'll start out using low end 5744 data in 30/06,308,&35 remington.Has anyone tried this powder before.
- 672 Views
- Last Post 13 November 2020
I have a chrnograph and recorded data from the other 2 powders,so I have a base of reference for potential velocity&pressure.
Gunslinger. It is my understanding that Lovex was the manufacturer of 5744 and their Buffalo Rifle powder is one and the same. Lovex has a down load PFD .I've used 5744 data with no problems. Gp
I have used 20 gr. 5744 in my 30-06 with a 205 grain bullet at 1605 fps. I bought Buffalo Rifle and had to increase the charge to 22 gr. to get the same point of impact. The load data in my Lyman 49th addition shows a beginning charge of 21 grs of "XMP" 5744 which I believe is the original formula for 5744 and matches the formula for Buffalo Rifle.
Lovex D060 is identical to Buffalo. Here is the Lovex manual
I have some limited experience with Lovex D060. It needs a bit of pressure before it burns completely. In my .30-06, 25-26 grs with a 170grs bullet (Arsenal HVTH1, which is a splendid bullet by the way) was good.
I have used all the Shooters World powders and they have been very good. The Buffalo is as advertised.
David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .
I was hopeful it would be a good replacement for 4759. Equal grain loads that I chronograph showed 200 FPS slower. Not to say it may not work with proper loads. Did this out of curiosity.
I'm going to do a test between Buffalo,5744&4749 in my Sako 06 using Lee 165 gr tumble lube,and maybe Lee 180 gr bullets.I have a chrno and am always curious about close powders and burn rates.A moot point I guess concerning 4759,but I have 2 lbs left.
Doc at the Hawkeye shoots Buffalo Rifle. Said it is like the old 5744. He likes it and does well with it.
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- Bullet Casting
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Buy, Sell or Trade
- Other Information & Reference
This Weeks High Earners
- RicinYakima 58
- Wm Cook 14
- David Reiss CBA Membership Director 10
- lotech 9
- Hornet 9
- John Alexander 7
- .22-10-45 6
- beltfed 5
- Duane Mellenbruch 5
- JeffinNZ 4