44 SWC poly coated

  • 202 Views
  • Last Post 28 March 2021
Two Bears posted this 27 March 2021

Hello - Just starting my cast bullet reloading journey.

My first run is going to be 240gr SWC poly coated hard cast. Looking for load data for these bullets. Will be ran through Ruger Super Blackhawk Bisley Hunters and T/C Encore. Looking for starting point and higher end loads.

Attached Files

Order By: Standard | Newest | Votes
Boschloper posted this 28 March 2021

Two Bears:

I use the same loads as I use with wax lube. Works for both target and full bore loads in .357 and .44 mags.

Wayne

Attached Files

Spindrift posted this 28 March 2021

I load poly coated bullets in a .44 auto mag rifle, it has basically the same powder capacity (with Starline brass) as the .44 Rem mag. You can use load data for jacketed bullets.

Attached Files

Two Bears posted this 28 March 2021

I loaded up a few different loads using loads using 2 different powders. Started with 4227 22gr, 22.5 and 23gr. Then H110 22.5, 23.0, and 23.5gr. Made 12 of each charge and will run them today. I am hoping atleast 1 of them will shoot in the Rugers.

Attached Files

Close