Hello - Just starting my cast bullet reloading journey.
My first run is going to be 240gr SWC poly coated hard cast. Looking for load data for these bullets. Will be ran through Ruger Super Blackhawk Bisley Hunters and T/C Encore. Looking for starting point and higher end loads.
Attached Files
I loaded up a few different loads using loads using 2 different powders. Started with 4227 22gr, 22.5 and 23gr. Then H110 22.5, 23.0, and 23.5gr. Made 12 of each charge and will run them today. I am hoping atleast 1 of them will shoot in the Rugers.
Attached Files
I load poly coated bullets in a .44 auto mag rifle, it has basically the same powder capacity (with Starline brass) as the .44 Rem mag. You can use load data for jacketed bullets.
Attached Files
Two Bears:
I use the same loads as I use with wax lube. Works for both target and full bore loads in .357 and .44 mags.
Wayne
Attached Files
wimilkman
28
pat i.
18
Tom Acheson
14
Aaron
12
MarkinEllensburg
9
Ed Harris
8
BRatigan
8
mashburn
6
porthos
5
MP1886
4
