Accurate 45 198T

Ed Harris sent me some of his Accurate 45 198T bullets from his new mold. I shot the 45 198 T side by side with a standard match load.  I loaded the 198 T with 3.9 gr VV 320, the match load was H&G 68 and 4.0 Bullseye, both give ~800 fps. I did not resize the 198 T, I seated them to a push fit in the cylinder of the 625, and ran them through a Lee factory crimp die. This revolver has a forcing cone to the cylinder throat so both loads used full moon clips, WW cases, CCI primers. Taper crimp. This type design has some real promise in revolvers. Steve