Ed Harris sent me some of his Accurate 45 198T bullets from his new mold. I shot the 45 198 T side by side with a standard match load. I loaded the 198 T with 3.9 gr VV 320, the match load was H&G 68 and 4.0 Bullseye, both give ~800 fps. I did not resize the 198 T, I seated them to a push fit in the cylinder of the 625, and ran them through a Lee factory crimp die. This revolver has a forcing cone to the cylinder throat so both loads used full moon clips, WW cases, CCI primers. Taper crimp. This type design has some real promise in revolvers. Steve
Accurate 45 198T
- 351 Views
- Last Post 28 April 2016
Ed Harris
posted this
28 April 2016
Thank you for the report!
73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- John Carlson 22
- linoww 17
- Bud Hyett 14
- drone 9
- MP1886 7
- beltfed 6
- Lucky1 6
- RicinYakima 5
- mashburn 4
- Aaron 3