Im about ready to start putting a .358 Win together using a Sprfld 03A3 action and 24” Shilen barrel. My reamer should be here next week and my Accurate 230 gr 360230 mould came in yesterday so I got a few bullets cast up. I would like to get around 1800fps and maintain accuracy. Has anyone used the 230 cast in the 358 Win ? What powders ? Thanks
.358 Win project
- 3.9K Views
- Last Post 08 March 2014
Hmmmmmmmmmmmmm... no 358 Winny experience!!!!!!!!!!! How about .350 Apex, Ackley Short Magnum or Norma Mag?
Attached Files
Which powders do you have available? What does your 360230 weigh and how is the fit? I've a little experience delivering a few 225 - 233 grains projectiles from a .358 Win format using AL8 and 7383 with a few powders in between.
Attached Files
According to the Shilen site my .359 sized and lubed bullet should be a good fit. Barrel wont be here for a week or so . By bullet weighs 226grs lubed and checked with my recycled and sweetened mix. The metal ends up being 14-15 bhn. Powders I have are 4198,4227,4320,3031,4064,4895,BLC2,846,H335,4831,4350, DATA2200 Red Dot, Bullseye,Unique,H110,296,AL-7,2400,680
If I can I would like to get 1800-2000 FPS for a hunting load . For punching paper I figured either unique or 2400 would get me there.
Attached Files
think more in the 3031 to 4831 area. I don't go that slow or light with my 358. but with the saeco #248 <250gr> sized to 358 diameter using rl-19 and fed-210 primers. I just went straight to jaxketed data, and just poked around the 48-50 gr area. I settled down between 48.5 and 49 grs and use the rifle mainly for deer. they don't stand a chance out to 250 yds or so, I just point and press the rifle does the rest.
Attached Files
Hmmmmm. I NEED to dig out my 1899 Savage!
Attached Files
Attached Files
All I can add is good luck and have fun on your new project! I do like the .35s in a long gun and think you'll end up with a good rig. Mine are either .357 Magnum or the venerable .35 Remington. I use LBT and Ranch Dog moulds for both, as well as others. The .35s are like the .30s as far as a wide variety of molds out there. With my Marlin 336 .35 Rem. I can get a 200 grainer going past factory speeds and maintain very good accuracy. Haven't made meat with it yet but have high hopes of using it on a Black Bear this fall.
Attached Files
.35's are great! I have Rem 700 in 35 Whelen, Savage 99 in .358, Marlin 36 in .35 Rem, Marlin in .357 Mag and a Ruger #1 in .357 Mag.
Working today on the 357430 (200gr RN PB ) in the 358 with BLC2. If you choose the 358009 go with a 1:14 or faster twist.
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference