I read a statement on the other forum by a guy who usually knows his stuff. He claimed you could use 3 grains of ANY of the fastest 25 powders from a burn rate chart in the .38 Special 158 LSWC and be aok, within specs from any loading manual. I haven't checked but if it's true it could help a guy deal with powder shortage problems.
.38 Sp. powder choices
- 8.9K Views
- Last Post 04 July 2015
I think we should delegate that project to Joe for a 5x5 factorial experiment!
73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
Attached Files
What is the fastest commercially available powder available in the US? Bullseye I suspect. 3gr tends to be the target load from what I have seen.
Cheers from New Zealand
Attached Files
TT, please do check manuals and websites. Some “Top 25” powders, like TiteWad, have been officially found unsuitable for cartridge loads.
Attached Files
Here is an exerpt from Hodgdon's Burn Rate Chart, you need to go deeper than 25! W231 is #29, Unique is #31
I'd have no concerns using 3 grains of Unique as a minimum start load in .38 Special, but some of the others listed I'm not sure....
1 NORMA R1
2 Winchester WAALite
3 VihtaVuori N310
4 Accurate Arms Nitro 100
5 Alliant e3
6 Hodgdon TITEWAD
7 Ramshot Competition
8 Alliant Red Dot
9 Alliant Promo
10 Hodgdon CLAYS
11 Alliant Clay Dot
12 IMR,Co Hi-Skor 700-X
13 Alliant Bullseye
14 Hodgdon TITEGROUP
15 Alliant American Select
16 Accurate Arms Solo 1000
17 Alliant Green Dot
18 Winchester WST
19 IMR, Co Trail Boss
20 Winchester Super Handicap
21 Hodgdon INTERNATIONAL
22 Accurate Arms Solo 1250
23 IMR, Co PB
24 VihtaVuori N320
25 Accurate Arms No. 2
26 Ramshot Zip
27 IMR, Co SR 7625
28 Hodgdon HP-38
29 Winchester 231
30 Alliant 20/28
31 Alliant Unique
73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
Attached Files
31 is even better! Like I said, I'm not making a load suggestion, just passing along an interesting bit of info. Anybody reloading SHOULD ALWAYS verify load info. I found this info while researching old posts on Trail Boss, of which I bought 5 .lbs back when. On the label it said something like “made especially for lead bullets” which got me right off. Now I gotta use it up somehow. The one claim to fame TB has is resistance to double charging. That's a whole 'nother subject as a double charge is actually a 'mistake' made by the reloader and 'shouldn't' happen. right? Anyway, I've loaded up 100 .38 Specials with the Ranch Dog TL 359-100 RF and 4.3 grains of TB. The idea is a load my daughters will like in my old Victory and 6” M&P.
Attached Files
I'll volunteer to test them if they'll send me a couple of pounds of each type!
:)
Attached Files
HUH, I thought Bullseye was faster than Red Dot. Shows how much I know.
Cheers from New Zealand
Attached Files
HUH, I thought Bullseye was faster than Red Dot. Shows how much I know.
Red Dot is always a clean winner on the charts, yes...
Now I'm currently using TiteGroup and 700-X, and if my hand and guns were in charge of establishing who got more stamina, I would say the TG clearly wins. But anybody with a chrono seems to find Bullseye and 700-X only a few fps apart... So TG has to be faster than Red Dot, right...:0
( If anybody is trying to find a logic here, there's none. Buy as many manuals as you can.)
And before (?) tturner feels bad about having started that thread, I'll say that I use the 3grs value in 9 Luger as a starting load with any “superfast” or suspicious powder, unless I find a lesser value somewhere.
Attached Files
speaking of hot powder, a couple days ago, a cci gold dot factory load ( blazer --- i know ... ) ... let go in my ij makarov ... big blue cloud, but little ij ejected the ruptured case; after crying time y inspection, put on leather glove y shot up half the box, no problem. i think i like steel guns ..
i been shooting makarov handloads for 10 years ( trap 100 ) with no problem.
my trap 100 is about 20 years old ( g ).. not on charts now.
oh .. wear shooting glasses ..
ken
Attached Files
I seem to remember an article that stated that 3.4 gr was the magic number for all reasonable powders with a 148 gr WC. I cannot validate that claim. I will say that I use 3.5 gr of HP-38 with good results.:^:
Attached Files
Now that I think about it, I might have been asked once for a universal pistol load... by someone who didn't give up easily...
Attached Files
I've always thought that the energy in smokeless powder was a function, primarily, of the weight of the charge. Maybe 2 scales, single/double base. Means a certain charge weight of any powder has the same energy. 3 gr of any powder has the same energy. Powders are varied by shape = surface area, additives, and single/double base.Thus I'd suspect that given a safe charge of very fast powder, ex: 3 gr, that 3 gr of ANY powder would be safe, and 3 gr of any powder ~ same fast would be accurate. Let us know of any explosions.
Attached Files
I am an Italian shooter Very concious of the value of cash. Here the price of imported VihtaVUORI or US p0wders is the double of .the price of locally made shotgun powders . For this reason I have often had to reloaded without a manual. I most often use powders used for 12ga trap or field loads,excluding the 12 magnum loads. I used the three grain test system, but with a lighter 150 gr bullet and my Smith& Wesson mod 29 357 revolver, to be on the safe side. The measure of the speed of the bullet with a chronograph and the study of the conditions of the fired case are are Always important.
Attached Files
I am an Italian shooter Very concious of the value of cash. Here the price of imported VihtaVUORI or US p0wders is the double of .the price of locally made shotgun powders . For this reason I have often had to reloaded without a manual. I most often use powders used for 12ga trap or field loads,excluding the 12 magnum loads. I used the three grain test system, but with a lighter 150 gr bullet and my Smith& Wesson mod 29 357 revolver, to be on the safe side. The measure of the speed of the bullet with a chronograph and the study of the conditions of the fired case are are Always important.
Attached Files
Giorgio,
I hope you get well soon. You are getting so small I can hardly see you anymore. Please don't disappear all together.
Ric
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- RicinYakima 22
- oscarflytyer 19
- Premod70 19
- Pentz 19
- pat i 18
- Lucky1 17
- Shuz 17
- .22-10-45 17
- OU812 16
- John Carlson 15