sizing die holding die

411 Views
Last Post 30 June 2023

CBA Member

porthos posted this 25 June 2023

on this site or cast boolits site. there is a vendor that manufactures a die that holds a regular sizing die; so that the bullet can be sized nose first. it cost around $65.00 or so. i can't recover who that might be. any help???

Attached Files

9 Comments

Order By: Standard | Newest | Votes

CBA Member

Ross Smith posted this 25 June 2023

I probably understand this wrong,but, why just use either Lee or NOE push thru dies.

Attached Files

Liked by

CBA Member

RicinYakima posted this 25 June 2023

Cost. If like me, he already owns 25 or 30 RCBS and Lyman dies.

Attached Files

Liked by

Standard Member

Wilderness posted this 25 June 2023

Portos - Suggest you make up a flat faced top punch to push on the base of your bullets to size them nose first with lube backed off. Then lube with a second operation, base first with correct top punch for the bullet nose.

Attached Files

Liked by

CBA Member

Aaron posted this 25 June 2023

Accurate Molds

With rifle in hand, I confidently go forth into the darkness.

Attached Files

Liked by

CBA Member

porthos posted this 26 June 2023

what Rick said: 30 lyman/rcbs; and 12 redding/saeco. i already have the NOE sizers; but i like more stuff. i found the source of the die i was looking for. it is on "the art and science of bullet casting" KEITH B makes them. a lot of stuff for the price.

Attached Files

Match Director

linoww posted this 28 June 2023

A lyman die will slide into the guts of a Lee neck size Collet die. That's what I used a few years back. I will have to dig it out and see what I needed to do to secure it or if it just stuck in there.IIRC I used a spare. 222 die

The other option is take the ejector rod "I" out of the die body "H" and pull the bottom " depth stop " out of the press and make a long punch, and just let em drop through. I've done it that way

"if it was easy we'd let women do it" don't tell my wife I said that!

Attached Files

Liked by

CBA Member

Ken Campbell Iowa posted this 29 June 2023

here is a highly professional napkin sketch of a generic expander/nose sizer/spring pin punch/bottle cap opener insert that goes into one of Lee's genius inventions...

the Lee expander die ... if you obtain some 9/16 round bar stock ... steel or aluminum .... you could make a lot of gadgets pretty quick on a mini-lathe ...

Attached Files

Liked by

Match Director

linoww posted this 29 June 2023

I couldn't reload without my sherline lathe and mill.it really allows some freedom when I get a wild hair to try something.

"if it was easy we'd let women do it" don't tell my wife I said that!

Attached Files

Liked by

CBA Member

358156hp posted this 30 June 2023

OP is thinking of Keith, formerly "The Perfessor". Here's the best route of contact for him that I have since he left CB forum, he can be found on this site https://artfulbullet.com/index.php?threads/sign-up-list-for-mark-ii-push-thru-bullet-sizer-set.8653/

Attached Files

sizing die holding die

Categories

Search

Popular Tags

This Weeks High Earners

Hot Topics