Does NOE not make a round nose punch? I've been looking on their website and all I found are flat nose punches. Am I looking in the wrong place, or what. I'm in the middle of placing an order and can't find the last item I need, and that's a round nose punch.
Mashburn
David a. Cogburn
Attached Files
when you order the mold usually in the list (at top) is a punch for that particular design(RN,FN,PTD...The pictures are a generic top punch that shows a flat.Hope this helps.
"if it was easy we'd let women do it" don't tell my wife I said that!
Attached Files
I'm just trying to find a round nose punch in .284 caliber for an existing mold that I own.
Thanks,
Mashburn
David a. Cogburn
Attached Files
To me they are all are pretty much custom fit to the bullet. What I usually do is find one (or 2 or 3) that looks close and then use JB Weld to make it fit the nose of the bullet I'm working with. Good luck, Bill.
A “Measured Response” is as effective as tongue lashing a stuck door.
Attached Files
Hello Wm Cook,
That is exactly what I'm going to do. I ordered a nose punch from NOE a few minutes ago and will do the JB Weld treatment. I keep putting off, getting on the lathe and making some punches to custom fit some of my bullets, but I was laid up for 8 months a couldn't even walk, let alone get to the shop and work. I'm hobbling around well enough now, that maybe, I can get that done before too long
I appreciate your reply and help greatly.
Mashburn.
David a. Cogburn
Attached Files
John Carlson
4
Aaron
4
linoww
3
fc60
2
John Alexander
2
Wilderness
2
