Guns and Ammo

CBA Member

fa38 posted this 11 December 2021

4 or 5 months ago maybe 2 or 3 hand guns in the local Fleet Farm. Now probably more than 50, mostly semi autos and a few wheel guns. Quite a few AR 15 types also.

Attached Files

Standard Member

Eddie Southgate posted this 10 December 2021

Not in my area . Lots of .308,.223,9mm and .45 ACP but not much else except way overpriced .22 LR . Lots of AR's and cheap pump shotguns . Other than that , not much.

Grumpy Old Man With A Gun......Do Not Touch .

Attached Files

Standard Member

Buttersdad posted this 10 December 2021

I have been looking around for people who decided to start reloading at the worst time in history, this past year. I have been finding quite a bit of reloading and casting equipment. It looks like it's all finally coming back. I live in a small town with one LGS and a farm store that sells firearms, ammo, hunting and some BP gear, and they are getting good amounts of ammo and guns in stock. The LGS is getting a good bit of powder most of the time, but like most places no primers for a little over a year. I have seen presses, press kits, dies and accessories at the online sites.

Hopefully this is a sign of even better things to come soon.

Attached Files

Liked by

Standard Member

alco posted this 09 December 2021

My local hobby shop has ammo, but it's mostly 9mm. A few boxes of other calibers which are extremely high. They got in a small lot of SP primers , but they would only let me have 3 boxes (300). It's still not looking good around here !!!

Attached Files

Liked by

CBA Member

RicinYakima posted this 09 December 2021

Varies by location. Nothing here but .223 and 9mm.

Attached Files

Liked by

Standard Member

GunStun posted this 09 December 2021

Am I wrong or the situation with guns and ammo has changed for the better? It seems like gun shops have ammo in stock again. Of course, it is mostly 9mm in most shops but if you have some time for searching, you may find smth else too. Unfortunately, I don't have much time to visit local shops, so usually get ammo online. It's easier to find ammo there that isn't just 9mm. For example, I've recently ordered at BulkMunitions some ammo for my old rifles. I was surprised that they have such ammo in stock, and the price was pretty good for me. Lucky...

Attached Files

CBA Member

Idahocaster posted this 06 May 2021

The gun shops here in eastern Idaho are getting creative in their attempts to look like they have ammunition and powder in stock. I have never seen a whole aisle of 50 BMG before. If you want 6.8 Western you can find it on a good day. Cans of black powder substitutes look like smokeless powder until you get close enough to read them. Nobody is even pretending to have primers though.

Attached Files

Liked by

Online CBA Regional Director

Tom Acheson posted this 05 May 2021

+1 on hporter's last two paragraphs!

Attached Files

Liked by

CBA Member

hporter posted this 05 May 2021

I have not called Lee, but I think the answer to the scarcity of Lee molds can be found on the auction sites.

My buddy has gotten back into casting and I have lent him a couple 6 cavity Lee molds to use. So I have been watching the auction site for 6 cavity molds for him. I have seen Lee 6 cavity molds selling for over $150 recently. Not asking for, but selling for over $150.

So if you can find a 6 cavity mold to purchase at MSRP or lower and then be able to resell it for 3 times that much on the auction site, it may be a long wait before any reasonably priced molds are available.

I agree with Little Debbie's response, it is not going to stop until people stop paying the inflated prices for reloading components.

But I don't see that happening soon. With very little ammo available to purchase in the brick and mortars, there are a lot of new shooters turned reloader's looking for anything they can get their hands on. I read an article yesterday that April was the 16th month in row of record NICS background checks. The demand for ammo and reloading components at this point must be insatiable.

David Reiss summed up the solution very nicely. That is, to accumulate things you need over time while they are available. Even for new shooter and reloader's, the last example of this bitter lesson was not too long ago. When primers and powders went scarce under a fairly recent presidential administration, the need to set aside what you need (both short term and long term) became very apparent.

Under the next administration things eased up, and we should have been quietly setting things aside for the future. I agree with David Reiss again, that is not hoarding, just using common sense and planning for the future.

It is heartening to me to see folks on this forum and other reloading forums help each other out, and sell molds and components at reasonable prices to one another.

It reminds me that the people who are buying up and selling components are most likely not shooter's or reloader's, but just people looking to make a quick and easy buck.

My hope for them is to get caught holding the bag of expensive items that they can no longer sell for crazy high inflated prices.

Attached Files

Liked by

CBA Member

Ken Campbell Iowa posted this 05 May 2021

does anybody have the real skinny on why there are no Lee molds for the last 6 months ? .. as in called them and asked them ?

i understand shooters hoarding primers and bullets ... but can't see all the newbies diving right into casting so quick ...

heck, maybe the one guy that ran the mold maker machine got covid ...

ken

Attached Files

CBA Member

David Reiss posted this 05 May 2021

I am getting notification emails on lots of powder being received, just about every powder I can think of. So they are becoming not so scarce.

Some jacketed bullets are still hard to come by, but are starting to trickle in.

Primers still non-existent.

David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .

Attached Files

CBA Board

John Carlson posted this 05 May 2021

Local Scheels has (yesterday ) 200 round boxes of Winchester 55gnFMJ for $139. Seems pretty normal but they're likely all gone today. Some powder but nothing anybody uses, Manager told me they have sold more primers this year than any other but, as some have mentioned, even with a limit of one brick per purchase, the shelves are empty within hours. Many end up advertised on Craigslist for $200/brick or listed on ammo auctions where they also bring exorbitant prices. He also said there have been four price increases on primers totaling 25 to 30%

John Carlson. CBA Director of Military Competition.

Attached Files

CBA Member

Eutectic posted this 05 May 2021

Someone has components. The local hardware store just got in plenty of 9mm, 40, 380 and 223. White boxes only the caliber and bullet weight on the end, no maker. I looked and they are all reloads, all kinds of cases, jacketed and plated bullets. All at over a dollar a round!

An entrepreneur at work.

Steve

Attached Files

CBA Member

David Reiss posted this 20 April 2021

The local gun shop that opened in my town last October that I am now doing their gunsmithing work is a good example of what is going on. They get in lots of handguns and sell them quickly, but usually have 40 or so in stock all the time. They are getting in some shotguns and rifles occasionally and they are selling fast also.

Ammo is like this, they get in 9mm, .223, .308, .40 and .45, other than that it is pretty sparse except .22 LR. Shotgun shells are sporadic. Reloading components are non-existent.

However I have heard cries on the forum from members who can't find powder and bullets, primers are a another issue. I can find powder and have even posted on another thread here a link to a powder source, no one responded to my post. The same company has repeatedly sent me email updates over the past few months when powder arrives and when I check their site much of it is still available. With the exception of primers, the other components can be found if you look hard enough.

I agree it will be some time before primers become available again, but I learned years ago to buy them when I could and keep a good amount for times like these. I am not a hoarder because my primers have been stockpiled over a 30 year period and not bought just as the shortage began. Now I have 12,000 to 20,000 of all primer sizes and have no worries. I have suggested this practice to anyone new to handloading over the years. Everyone that has been handloading since the 80's should have learned this lesson, if not it is a hard lesson to swallow now.

David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .

Attached Files

Liked by
and 1 others

CBA Member

Bud Hyett posted this 19 April 2021

Does it look like the supply of guns and ammo might be loosening up ?

Skagit Arms in Burlington. WA received two semi-truck loads two weeks ago on Thursday. They filled the law enforcement orders and then sold to the public who were on a waiting list. They went through 950,000 rounds of ammunition by 2:00 PM. They were again out by 2:00 PM. With Remington coming back online for ammunition, the hoarders will get fulfilled sooner, but the craze will continue.

Farm boy from Illinois, living in the magical Pacific Northwest

Attached Files

CBA Member

Bud Hyett posted this 19 April 2021

You are correct in your assessment by my estimation, we as the reloading group will not see components (especially primers!) until the Fall of 2022 at the earliest. With Remington coming back online for ammunition, this should help. The problem is not getting the raw materials as much as getting transportation to haul to the plants.

I am good for this year and next year by strict rationing. I'll use V-V N110 and N120 for practice to reserve the AA 4100 for matches. My .25-20 WCF likes AA #9 and it will get that in place of AA 4100. I bought a lot two years ago at sales to stock up for the same lot number and that is a benefit now.

Prairie dog shooting may be limited by the powder choices that I have, fortunately plenty of IMR 4064 for the .220 Swift.

Farm boy from Illinois, living in the magical Pacific Northwest

Attached Files

CBA Member

mashburn posted this 19 April 2021

Hello to all,

I hate to be a stick in the mud, but I think you guys are looking for things to change too soon. I hope you are right but as for me, I'm afraid these shortages of firearms, ammo and reloading components are going to be a longer term that most of you are expecting.

Mashburn

David a. Cogburn

Attached Files

CBA Member

max503 posted this 19 April 2021

The Godfrey, IL Walmart had 2 boxes of Winchester 308 on the shelf at regular price yesterday.

Attached Files

CBA Member

Little Debbie posted this 19 April 2021

Demand is outpacing supply for various reasons. We stop it by not buying at the prices that are being asked by the resellers on the net and other places. When I see stuff on the shelf at retailers the prices are msrp no discounts, but no gouging either. A couple of small gun stores in my area have primers on consignment for truly outrageous prices. I don’t buy them but they don’t last so someone is. The hoarders/gougers will get there fill at some point and we will see stuff on shelves. I will then buy a few primers, powder, gas checks, and .22 LR every month to shoot and have on hand in times like these. Just like I have since Clinton’s assault rifle ban. Patience is the only answer now. But I’m amazed about how much I think about each primer I seat and .22 LR shoot before I do.

Attached Files

Liked by

Standard Member

Qc Pistolero posted this 19 April 2021

Up here in Qc Canada I've been trying to buy a Dillon 750 but everywhere nothing available.16 weeks backlog!!!

Primers and powder are still available but prices have soared up 50 to 60% compared to 6 months ago.Problem is my income goes up only 1.5%/year thanks to our soft gungrabber canadian premier.

Attached Files

Liked by

Guns and Ammo

Does it look like the supply of guns and ammo might be loosening up ?

Categories

Search

Popular Tags

This Weeks High Earners

Hot Topics