I've mentioned my new Lyman Mustang break barrel in-line muzzle loader in previous posts. Something that has been on my mind since the purchase is that when the action breaks open it sets the firing pin in the cocked position. I don't see real danger in loading the rifle in this condition as no primer is installed. What my thought and worry is, should the rifle be put away after clean-up in this cocked condition or should I dry fire it to release the spring tension? I thought I'd ask the group as I'm not used to dry firing weapons. What's your thought please? Gp
Break barrel in-line
- 739 Views
- Last Post 18 February 2018
I keep some spent primers to dry fire,leave spent primer on and then store it. Nosee.
Thank you nosee. Sometimes the simplest of things escape me. It is somewhat of a wonder I still have all my digits after 45yrs of carpentry and 35yrs. reloading. Gp
Primers used in a In-Line may have Black Powder residure that could cause a bit of rust on your hammer nose or clog up your nipple.
I have a buddy in N.C. that uses primers punched out on his shotgun press as "snap caps" for his In-Line. Paints 'em red and keeps a few in an old pill bottle in his Black Powder shooting box.
Can't have ya getting yore nipples clogged.
Long time Caster/Reloader, Getting back into it after almost 10yrs. Life Member NRA 40+yrs, Life S.A.S.S. #375. Does this mean a description of me as a fumble-fingered knuckle-draggin' baboon. I also drool in my sleep. I firmly believe that true happiness is a warm gun. Did I mention how much I HATE auto-correct on this blasted tablet.
Storing BP firearm in the off season is very hard to do sometimes,moisture is the problem for me.TC borebutter,works as good as anything. Nosee.
nosee: We are blessed here in S.W. Idaho with a very arid climate. It can happen, but you have to be pretty negligent to get things to rust. So far, not knowing any different, I've been spraying RemLube down the bore after cleaning and cleaning it out with alcohol before shooting. Bman: No worrys I have hundreds of fired hulls to pick primers from. Thanks guys. Gp
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- Bullet Casting
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Buy, Sell or Trade
- Other Information & Reference