New NOE 35 Thumper, 360-310 FN Active Group Buy Now!

  • 2.6K Views
  • Last Post 28 September 2015
yodogsandman posted this 30 August 2015

Here's a link to the new NOE 35 Thumper, 360-310 FN active group buy. This replaces the NEI 358 282 GC clone with a more modern and improved version.

Those that sign up during this NOE group buy will receive a 15 % discount on their mold.

http://noebulletmolds.com/smf/index.php/topic,1026.0.html>http://noebulletmolds.com/smf/index.php/topic,1026.0.html

Attached Files

Order By: Standard | Newest | Votes
yodogsandman posted this 01 September 2015

The minimum orders are in and the tooling has been ordered! Don't wait long if you'd like to get in on this group buy mold for a heavyweight .35 with a big ol' flat nose!

Attached Files

yodogsandman posted this 16 September 2015

Some confusion exists whether this bullet will stabilize in a 1 in 16 twist rifle. Using the following modified Greenhill Formula calculator, this bullet (1.219” long x .360” dia) will stabilize in a 35 Whelen with a 1 in 16 twist at 1800 FPS.

A 1 in 12 or 1 in 14 twist, 35 Whelen will easily stabilize it.

http://kwk.us/twist.html

Attached Files

yodogsandman posted this 18 September 2015

LAST CALL!!! This is going on the mill next! Order now!  document.write('/images/emoticons/big_grin.gif');

Attached Files

Ed Harris posted this 21 September 2015

yodogsandman wrote: Some confusion exists whether this bullet will stabilize in a 1 in 16 twist rifle. Using the following modified Greenhill Formula calculator, this bullet (1.219” long x .360” dia) will stabilize in a 35 Whelen with a 1 in 16 twist at 1800 FPS.

A 1 in 12 or 1 in 14 twist, 35 Whelen will easily stabilize it.

http://kwk.us/twist.html>http://kwk.us/twist.html FYI my LBT 361-260FN is a plainbase of almost identical shape, but is just under 1” long and does stabilize subsonic in a 16” twist.  My plinker load is 8 grains of Bullseye in a .30-30 case necked up to .35 for 1080 fps.  Hunting load is the same bullet and 1:30 alloy with a compressed caseful of 4064, RL15 or Varget for about 1600 fps.  Performance very similar to a .38-55, but being a .35

73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia

Attached Files

yodogsandman posted this 26 September 2015

Ed, That's a good lookin bullet!

This group buy is now closed.

My molds are shipped and on the way! The anticipation is building! Can't wait! javascript:emoticon(':D', 'images/emoticons/big_grin.gif')

For those that missed out, this is a regular inventory item on the shelf and ready for purchase.

Attached Files

yodogsandman posted this 28 September 2015

Received my molds today, 3 hours ago! Woo Hoo!! Cast some right away with COWW's + 2% Sn. Loaded a couple, sized and GC'd, in some dummy cases, a C.O.A.L. of 3.375” looks about right in my rifle. This engraves with about 1/4” lines all around the nose. At this length, the bottom of the top lube groove is even with the case mouth and the base is a little above the case neck and shoulder junction. The mold started throwing good ones after about 10 casts. I had washed it down with rubbing alcohol, lubed it up and heated to 375F (air temp) on a #10 tin can covered hot plate. PID was set to 725F and bullets dropped frosted with band diameters of .360".

Attached Files

Categories
Search
Popular Tags
This Weeks High Earners
Hot Topics
Close