WTB 30 Remington Dies and shell holder.

  • 151 Views
  • Last Post 1 weeks ago
  • Topic Is Solved
Wheel Weights posted this 2 weeks ago

Not the AR cartridge, the original from the Models 14, 141, 8, 81 and 30.

Unusual to find an 81 in 30 Rem

 

Attached Files

Order By: Standard | Newest | Votes
ALYMAN#1 posted this 2 weeks ago

Seems like I have seen that you can use 30-30 dies - Lyman shell holder is #15 from CB manual #3.  Neck is longer and shoulder is set back.  You would probably have to dedicate a set of dies to the application.  Good luck.

Attached Files

Wheel Weights posted this 2 weeks ago

 Since it headspaces on the shoulder, I would not want to set it back.

Attached Files

Wheel Weights posted this 2 weeks ago

Found dies and 200 new cases !

Attached Files

  • Liked by
  • Ken Campbell Iowa
Lee Guthrie posted this 2 weeks ago

Some people are luckier than others.  frown  I need both dies and brass for my Model 8.  Which is nowhere near as nice looking as the rifle in your pic.

Attached Files

Wheel Weights posted this 1 weeks ago

Join this site he has some.

https://www.24hourcampfire.com/ubbthreads/ubbthreads.php/ubb/viewmessage/message/1036809/gonew/0

Buffalo Arms is a great source:

30 rem cases are out of stock but these can be necked down.

https://www.buffaloarms.com/32-remington-cases-jam32rem.html

you might check when they will have these.

htmhttps://www.buffaloarms.com/30-remington-die-set-rcbs-rcb29201.html

Attached Files

Close