Thinking about a new lead pot

  • 333 Views
  • Last Post 01 August 2021
M3 Mitch posted this 30 July 2021

Reading about the failed Lyman 20 # pot, and the Chinese Lyman 25# pot, I am wondering, who makes a good casting pot anymore?  I understand RCBS also makes their pots in China now.  Of course just because it's made in China does not mean it's junk, but it does seem that's a good first guess. 

 

Or do I just go on the hunt for an older RCBS, American made pot?

Attached Files

Order By: Standard | Newest | Votes
RicinYakima posted this 30 July 2021

I bought one of the RCBS dipping pots with a built in PID. It works as advertised, but you have to leave it on when done to cool the electronics off, keeps fan on. Since I empty my pot at the end of the day into ingots, it only takes about 10/15 minutes. 2/3 pot takes about 4 hours. 

Attached Files

  • Liked by
  • M3 Mitch
  • smokyboom
John F. posted this 31 July 2021

What about the WAAGE pots, that were popular years ago?  I bought one shortly before I took a hiatus from casting,

but have been happy with it.  Very robust and USA made.  At the time they were "discovered" by casters, they were

quite the bargain for quality, epecially compared to the "specialty" furnaces from Lyman and even RCBS.  I checked a

couple of months ago and they are still in business, with a large assortment of pots, etc.   Prices are  higher than I remember,

but that's to be expected!   Does anyone here have any comments about their experience with WAAGE pots, good or bad?

Thanks, and hope this helps!  (BTW, mine is not a bottom-pour pot -- ladel only, which I came to prefer after working with

the Lee garbage pots for way too long.)

John

Attached Files

  • Liked by
  • M3 Mitch
David Reiss posted this 31 July 2021

Why don't we mention the Lee pots. I have two 20 lb. Production pots that are close to 40 years old and still going strong. 

I know of several long time casters who also use the Lees which are as old as dirt, but some still put them down. On top of that they are easy and cheap to fix if you every need to do so. 

So junk, I don't think so. 

David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .

Attached Files

  • Liked by
  • M3 Mitch
John Alexander posted this 31 July 2021

My elderly 20 pound Lee, after many years of excellent service, recently got difficult to keep it from dripping.  Some of the aparatus for the bottom valve was worn and out of line and I called Lee for advice,  Unlike Lyman, they repair and they said send it in and they would tell me what it would cost to fix or send it in and they would send a new one for half price. I choose the half price option and now have a brand new non leaking pot. If it lasts as long as the old one I will be 112 when I need to trade again.

I thiink some folks shy away from Lee becaus the price is too low but "you get what you pay for" is sometimes a misleading guide.

John

Attached Files

  • Liked by
  • M3 Mitch
358156hp posted this 01 August 2021

M3 Mitch- are you looking for a bottom pour, or a ladle pot? Buffalo Arms has a ladle pot that looks like it was made by Waage, plus Magma Engineering offers both ladle pots and bottom pour. Prices are on the painful side.

https://www.buffaloarms.com/lead-casting-furnace-115v-ladl-rcb99989.html

https://www.magmaengineering.com/masterpot/

https://www.magmaengineering.com/cast-master/

Attached Files

  • Liked by
  • M3 Mitch
ray h posted this 31 July 2021

John what model Waage do you have? What is the capacity?  Thanks

Attached Files

Tom Acheson posted this 31 July 2021

A few years ago I had a old Lyman 20-pounder die on me. To replace it, I bought a 40-pound Magma Engineering pot. A lot of my molds are single cavity, the large BPCR type. Having a larger (than 20-pounds) batch of alloy has helped me produce more bullets of a consistent, known alloy, during a casting session. 

The pot was made to omit the bottom pour feature, since I’m a ladle only caster. It is connected to a PID which helps in the consistency department.

Tom

Attached Files

Boschloper posted this 01 August 2021

John:

If you don't make it to 112, I'll buy your Lee pot from your estate. I love them. 

Attached Files

Little Debbie posted this 01 August 2021

Nothing wrong with Lee pots. I wouldn’t purchase anything else, certainly never spend the money on another RCBS or Lyman. My RCBS is still running, used it this evening along with my 20 pound Lee. Use them both when casting with 5 or 6 cavity molds. My first Lee pot from the early 80s and given to a friend when I “graduated” to my RCBS pot like a real caster. My friend still uses it frequently. Do they drip yes, but so does my RCBS and so did the Lyman I had for a while. They stop dripping if you disassemble them now and then and clean the plunger. Flux thoroughly and get the stuff to the top that can lodge in the spout and cause drips. Empty your pot after every session and scrape all the dirt from the bottom and sides of the pot and dump it in the trash when the pot is cool. Neither my RCBS or Lee dripped tonight and haven’t for years. A thermometer will allow you to assign temperature values to the mostly meaningless numbers on the dials of any pot.

Attached Files

hporter posted this 01 August 2021

The Waage pots are very nice. I use my K-4757 20 lb dipping pot for ladle casting large bullets for my Sharps and Browning BPCR rifles.  You used to have to email them about that specific model, as it wasn't on their website when I bought mine in 2014.

I agree with the comments that the Lee pots are not junk.  I have 3 or 4 of them and they have performed very well.  I also have a RCBS bottom pour, the older model without the PID controller that is very nice to use with large multiple cavity molds.

I just wanted to mention that for those with the dripping problem on the Lee pots, another option is to order a solid bottom replacement inner pot from Lee.  Very inexpensive and turns the bottom pour into a dipping pot for ladle casting.

Attached Files

Close