I recently purchased a leather front bench rest bag from Brownells. I was wondering what filler folks recommended. Lead shot, sand, rice? Thanx,
Recommended filler for leather bench rest bag
- 3.4K Views
- Last Post 13 November 2023
- Topic Is Solved
I prefer sand, filled to a moderate firmness. Having said that, kitty litter works well and is lighter. GW
A lot of the jacketed benchrest shooters use some kind of very dense heavy sand and stuff them so full that they are more like a piece of cast iron than a sand bag. Since mine seem heavy enough to carry back and fourth I have always use plain old clean and that seemed OK. Since rice of air soft balls would be much lighter, maybe I should try them.
From the FWIW dept.....
"Regular" beach-like sand (dry) has an average bulk density of about 100 PCF (pounds per cubic foot) and the heavy sand is probably zircon sand at about 170 PCF. Some foundrys like the zircon version because it gives a better finish on the casting (and possibly other reasons) but it is more expensive.
Try packing the sand loose, firm and compacted, shoot a separate target with each condition and let your targets tell you which works best.
Might want to check the CBA benchrest match rules and see if the need for the "sand" bag to be playable with finger pressure is mentioned. Now there's a subjective thought!
When we lived in NE Nevada we had no need to think about our bag filler absorbing moisture from the air. More likely the air would want whatever moisture our bird seed filler held. It may pay us to rethink that here in Missouri's Ozarks.
All you listed have been used............. but currently most people are using plastic airsoft BB's.
I recommend what I use. From Harbor Freight, #12 grit Walnut shell media. I use it in my vibratory cleaner too. Source:
Most agree too hard is bad. Also, too soft and it kind of ruins the reason for a steady rest in the first place. I use plain jane play sand, but putting the right amount in makes a difference. You want the bag to hold its shape and not slump. Make a forming plate to keep the bag in shape when the gun isn't in it, the same size as your forend. Maybe at the start of every shooting session, just give it a bit of fluffing to keep it from getting too hard. The rear bag should get the same treatment. It has to have enough sand to keep its shape, the ears need to conform somewhat to the butt. But not too hard.
I too like the heavy sand...but only for rear bags. In front, I use clean sand. The heavy sand is finer than regular sand and can filter out of bag seams..didn't want sand gunking up threads in front rest.
There is obviously more than one way to skin a cat although some people think they know the only one. I shot with some top jacketed bullet benchrest score shooters for several years. As mentioned above their bags could just as well been made of concrete with a leather cover. "Bag Squeezers" was not a complimentary term -- but occasionally a bag squeezer with a soft bag would beat them anyway.
Hard to imagine a better sandbag filler than sand. Also, it seem that an overfilled sand bag , regardless of filler, with no "give" would prove a disadvantage in most, if not all situations.
I use spent ground corncob case tumbling media.
73 de KE4SKY In Home Mix We Trust From the Home of Ed's Red in "Almost Heaven" West Virginia
It can be a bit of a nuisance to fill and empty the bags.Before you fill the bag with some light weight material maybe try one of the cheap prefilled bags from Walmart to see if you like the light weight bag.I prefer a bag that stays where I set it.
I use double bagged wool socks and stuff them very full/tight with corn cob media. Easy to mold, beat around and get the shape I want and much less dust. And nowhere as heavy as sand. I have not tried it in a leather bag. For that, sand is probably better.
I use the walnut hull media when it gets to where it doesn't work fast. When I first started using bags more years ago than I care to remember you will be astonished as to what my bags were and what they were filled with. My bags were the pretty Crown Royal sacks and they were filled with corn The only time I used shooting bags in those days was to sight in firearms. They worked until one day I opened my shooting bag and discovered that some kind of bug or worm or something had gotten into my corn filled bags and turned them into cornmeal and my shooting bag was full of the little critters.THEY ALSO GOT LOOSE IN THE HOUSE AND NEEDLESS TO SAY MY SWEET WIFE WASN'T VERY HAPPY WITH ME. Now if you don't agree that I was impoverished in my younger days, something is wrong with you. My shooting bag in my shooting house where I deer hunt is a leg cut off of a pair of old wrangler jeans with the end sewed up, filled with sand and the other end tied up. I have it laying to where when I can rest my rifle on it full length. I use my rabbit ear bag on it on the rear for the buttstock. Sometimes I have to put the rabbit ear under the forearm depending on the angle I'm shooting. The shooting house is about 16 feet tall. I have a 2x12 board c-clamped across the window sill that the long bag lays on. You can put your armpit over the long bag and do whatever you want with your left arm. It's rock steady. You sometimes have to shoot about 350 yards.
David a. Cogburn
There are at least two variations of sand.
”Regular” sand, similar to beach sand, weighs about 100 pcf (pounds per cubic foot).
The “heavy” sand is zircon sand and is usually about170 pcf. Zircon sand is used in making castings. It produces a finer finish on the metal casting. In the 90’s the Ford site in Windsor, Ontario switched from regular sand to zircon sand, it may have been about the same time they moved from cast iron to aluminum for engine blocks. So maybe the zircon was better for aluminum?
There are two choices: baby powder or shoe polish.
If you shoot free recoil, not touching the rifle, it is baby powder.
If you hold the rifle, or shoot in bad weather, I have found nothing better than Kiwi shoe polish, well buffed in.
When the bag no longer holds its shape, throw it away. It is an expendable item.
(b) Sandbags – Shall be of one or more materials which can be easily flexed with the fingers before being filled with a non-metallic material similar to dry sand.
Fine dry sand works for me
I'm mostly a rifle ignoramus, but wanting to learn. I don't actually like shooting at a bench very much, but that may be because I don't really know what I'm doing. I figured that I need to learn if I want to get my rifle(s) to perform well and be able to see what sort of groups that they are capable of. Not being a sophisticated bench rest shooter I just want something that doesn't feel like ship's ballast to carry, but does the trick. The walnut shell suggestion sounds good. I need to get some of that stuff anyway for my motorcycle projects.
What type front sand bag rest are we talking about...there are several.
I use heavy sand from Sinclair in both front and rear bags.
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- Bullet Casting
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Buy, Sell or Trade
- Other Information & Reference