Greetings,
In your experience, when shooting a load with only half a case filled with powder, in particular IMR4198, or less, using Green Dot and Unique, which gives more consistent results: having the powder falling to the primer by tipping the barrel of the rifle up, having the powder falling to the bullet by tipping the rifle tip down (or just the cartridge)? I am using loads from the Lyman Cast Bullet Reloading Manual, and I did not see where it addresses this issue. I am loading nominally one grain above the lightest charge listed and one grain blow the heaviest charge listed to see if one is significantly better than the other for grouping.
I hope to hit the coyote at least half the time.
TK