Ok let's be honest about this. If you only had one bullet mold for 38/357 cal. For revolver or lever gun, for plinking, hunting,etc. What would it be. With gas checks or plain base. ?? I think mine would be the Lyman 358156....
Only one mold ??
- 823 Views
- Last Post 05 August 2023
- Topic Is Solved
These I already own, I'm soon selling the rest:
- .38 Special: Lachmiller 38-148-WC (Plain base)
- .38 Special: RCBS 38-150-SWC (Plain base)
- .357 Magnum: RCBS 38-162-SWC (gascheck)
Farm boy from Illinois, living in the magical Pacific Northwest
Attached Files
Man does not live on one Mmold alone! lol
Attached Files
Just looked at my spreadsheet of molds and I have 64 different .357"-.359". Yes I am a collector, some may say hoarder, but what do they know.
I've never met a mold I didn't like.
The best thing is that when I find a new mold I've got to find a gun to go along with it. Sounds good to me.
Choose one, you've got to be kidding.
David Reiss - NRA Life Member & PSC Range Member Retired Police Firearms Instructor/Armorer
-Services: Wars Fought, Uprisings Quelled, Bars Emptied, Revolutions Started, Tigers Tamed, Assassinations Plotted, Women Seduced, Governments Run, Gun Appraisals, Lost Treasure Found.
- Also deal in: Land, Banjos, Nails, Firearms, Manure, Fly Swatters, Used Cars, Whisky, Racing Forms, Rare Antiquities, Lead, Used Keyboard Keys, Good Dogs, Pith Helmets & Zulu Headdresses. .
Attached Files
Mine is the 358156. I powder coat them and don’t use a gas check….. But then I have a very nice 358429 that I would like to send to Eric for the hollow point treatment.
Attached Files
A late production Lyman 357446.
Just to be different. I have a handful of them with the big front driving band, plus I'd like to avoid gas checks if at all possible.
Attached Files
Its going to be a long winter!!!!
Jon
Jon Welda CW5 USA Ret.
Attached Files
I'm going back to only two molds. Only one of I find a 170 gr 38/357 mold. Got one to sell?
Attached Files
If my only mold was a Lee , I would quit casting.....
Attached Files
- Liked by
- and 2 others
My favorite is the keith style 158 gr. But really, I thought it was mandatory that we go thru 6-7 molds per firearm to find the right one, even if the right one was the first one.
Attached Files
- Liked by
- and 2 others
My favorite 38/357 mold that I have is a Lee 358-158-RF that was covered to hollowpoint by Erik Ohlen. It casts well and is accurate in all my 38/357 revolvers. If I could add a second mold it would be a 148 grain wadcutter.
Attached Files
358429 hollow pointed by Eric. I like his inset bar system.
Attached Files
Doubt it. Not everyone needs several molds for only one caliber. I have 6 different 38 molds. But I only use one. No doubt be getting rid of the others..
Attached Files
Categories
- All Categories
- General Polls
- Contact Us w/ Forum Issues
- Welcome to The Cast Bullet Association Forum
- General
- Bullet Casting
-
Guns and Shooting
- AR Platform
- TC Contenders & Other Single Shot Handguns
- Shotguns
- Informal Matches & Other Shooting Events
- Gunsmithing Tips
- Gun Cleaning & Maintenance
- Optics
- Benchrest Cast Bullet Shooting
- Military Bench Rest Cast Bullet Shooting
- Silhouette Shooting
- Postal Match Cast Bullet Shooting
- Factory Guns
- Black Powder Cartridge
- Hand Guns
- Lever Guns
- Single Shot Rifles
- Bolt Action Rifles
- Military Surplus Rifles
- Plinkers Hollow
- Muzzleloaders
- Hunting
- Reloading
- Buy, Sell or Trade
- Other Information & Reference
Search
This Weeks High Earners
- wimilkman 30
- Tom Acheson 22
- pat i. 18
- Aaron 12
- BRatigan 10
- MarkinEllensburg 9
- Ed Harris 8
- mashburn 6
- porthos 5
- joeb33050 4