Mold handles

  • 211 Views
  • Last Post 02 January 2023
  • Topic Is Solved
2frogs posted this 01 January 2023

Will Lyman single cavity handles work with double cavity molds ?

Attached Files

Order By: Standard | Newest | Votes
delmarskid posted this 01 January 2023

I needed to grind the inside surfaces but they worked

Attached Files

  • Liked by
  • 2frogs
  • Bud Hyett
358156hp posted this 01 January 2023

Unmodified, no. IIRC, the blocks won't fully close, and leave a wedge shaped gap at the front.

Attached Files

  • Liked by
  • Bud Hyett
  • RicinYakima
RicinYakima posted this 02 January 2023

Will Lyman single cavity handles work with double cavity molds ?
Single cavity handles bring 50% more on eBay than doubles! Never going to make them again. 

Attached Files

  • Liked by
  • delmarskid
  • 358156hp
res45 posted this 02 January 2023

The Lee six cavity mold handles will work just fine, no fitting necessary. I use them all the time for my Lyman two cavity mold.

What Lee six cavity mold handles fit.

'Artisan' in Lead, Brass & Powder.

Attached Files

  • Liked by
  • John Alexander
Ross Smith posted this 02 January 2023

IF you have a choice, NOE handles can be made to fit most molds. Works for me, maybe you too.

Attached Files

358156hp posted this 02 January 2023

Will Lyman single cavity handles work with double cavity molds ?
Single cavity handles bring 50% more on eBay than doubles! Never going to make them again. 
I need to pay closer attention to things like this, I probably have a half-dozen or better of them.

Attached Files

Close