Changing case brand/headstamp
Some spend a lotta $ on Lapua or Norma or ? brass, hoping that more $ = smaller groups. Since I’ve never seen test results supporting this hope, this goes on the bottom of the spectrum for now.
Threshold: I use lots of same-he3adstamp brass, don't know2 if this makes a difference, or where.
Attached Files
Back in my early 20's I was shooting a lot of 3006 with jacketed bullets. Once to prove it to myself, I sorted all my assorted brass by head stamp and weight. I found a significant reduction in group size, from 2.5 to 3 inches, down to 1.25 inches in weight sorted brass. I did not keep it up as I was shooting mostly offhand practice, and figured that I could not personally hold my offhand groups small enough to see a difference in weight sorted and head stamp sorted brass. In other words it was just too much trouble to keep it all separate.
As usual Joe has hit the nail on the head with his BS lists. Especially the shooter list. Unfortunately, the truth of these lists makes us admit or realize that we aren't near as good as we thought we were, and our excuses are just smoke in the wind, or a bad smell in the wind. Take your pick.
B.E.Brickey
Attached Files
John Alexander
47
linoww
38
Bud Hyett
38
RicinYakima
26
pat i
24
Tom Acheson
21
sluggo
20
Eddie Southgate
20
Justin.P
19
Glenn R. Latham
19
