I do not know the bullet number these were given to me I plan on shooting them in my 30/30 model 94 one a time single shot since they are a 30 cal pointed (Spitzer) bullet sized .310. All I can tell you is they are a gas checked pointed bullet that has 3 grease grooves and weighs with the gas check and lube applied they weigh 134 grains. Checking the length with my Caliper I get .826 with the gas check on it.
The powders I have on hand are 2400 and Unique. Since these will be plinking loads I would like to use Unique. There is nothing close to this in the Lyman Cast bullet hand book. Closest is a 122 grain and it does not show Unique or 2400.
Anyone got any suggestions for a load.
My normal load for 30/30 is 17 grains of 2400 with a Ideal 311407 bullet or equivalent. (these weigh over 180 grains and I see no pressure signs)
Since I do have these 134 grain ones I would like to shoot them up. Like I said I would like to use Unique for these if I can.
Note I do not want to use any fillers or tuffs of fiber ect.