Hi All:
As some of you may know from my intro post, I am involved in a project to fire lap some Carcano rifles that I have.
Research tells me that I need a cast bullet of around BHN 11 -12.
In slugging the bores of these rifles, I found a diameter range from .268 to .272, with most being around .269+
For the last few days I have done an extensive internet search, and some phone calls in order to find a supplier to meet my needs. The bottom line is that so far I have come up with nothing.
I couldn't even find a mold listed that advertised a cast larger than .266
My question is: Do any of you know of a supplier/caster that might help me out?
Any and all info is most sincerely appreciated.
BFB ... AKA Bill