Looking for an accurate 338 cal. bullet in a 1-10 barrel at between 1600-2000 ft/sec the cartridge is 6x338. Any suggestions?
Thanks
Lee
Looking for an accurate 338 cal. bullet in a 1-10 barrel at between 1600-2000 ft/sec the cartridge is 6x338. Any suggestions?
Thanks
Lee
Attached Files
For what cartridge ? We have the RCBS 33/200 which is a 338 caliber 200gn flat nose gas check design. We sell those for use in the 33 Winchester but should also work well in other 338 caliber cartridges. From feedback from customers this bullets performs well in the 33 Winchester. I once long ago had a Winchester model 1886 in 33 Winchester and this is the bullet I used and it shot very well for me too.
Attached Files
The RCBS mold is a good idea. The cartridge is 6x338. What size do the bullets drop from RCBS 338/200?
Attached Files
There is this NOE:
http://noebulletmolds.com/NV/index.php?cPath=33_240&osCsid=c1reda4s3q552ei1u5te05i780
I placed 2nd overall with it at a CBA match.
And this one:
http://noebulletmolds.com/NV/index.php?cPath=33_237&osCsid=dco1igain72til3d1uk9fte5t6
BTW, what is a 6 x 338?
Frank
Attached Files
Rem 6 BR expanded to 338 is close to my version. Mine is a little shorter than 6BR.
Thanks for the info on the NOE molds.
Lee
Attached Files
Looking for an accurate 338 cal. bullet in a 1-10 barrel at between 1600-2000 ft/sec the cartridge is 6x338. Any suggestions?
Thanks
Lee
Attached Files
Lee , check with accurate molds. I use a 6br case with their 340270E mold. it comes out .340 on the bands and 330 nose. weights 255 gr in lino. I use it in UNP competition. get the mold in a 4 or 5 cavity. they all weight within a half grain.
Attached Files
I've bought Accurate molds before they work. I'll look at 340270E.
Thanks
Attached Files