CB
posted this
10 December 2008
Jeff and all,
Finding the center of the mold is not a problem and beagling the mold with two cavities is challenging, but not impossible. I am looking at maybe an increase of .0015.
This is the mold that I want to enlarge: http://www.lymanproducts.com/lyman/bullet-casting/mould-details-rifles.php?entryID=58>http://www.lymanproducts.com/lyman/bullet-casting/mould-details-rifles.php?entryID=58
I have a RD class=Tahoma-16pxbTLC359-190-RF mold that works extremely well, plus I have a Lyman 214 gr 358 SWC mold that works surprisingly well in the Marlin 336 in 35 Remy.
I may try to make a “cherry” for this mold, that will cut the bands properly. I have some reamers that may fit the job to do this with. I bought a grab box of reamers a few years ago and there are a few that maybe useful for this project.
But an expanding lap maybe the best choice. I want to plan this out, so ooops don't happen.
Again Thanks,
Jerry